Needle punched nonwoven Geotextiles with high uality polyester staple fiber as raw material, through carding web acupuncture. These needle-punched geotextiles are made of 100% polypropylene staple fibers, which are formed into a random network for dimensional stability. They resist ultraviolet deterioration, rotting, biological degradation, naturally encountered basics, and acids. Geotextiles include fabrics for separation and stabilization, subsurface drainage, filtration and cushioning. The nonwoven PET geotextilesare applied in roads, embankment, airfields, landfills and sports construction projects.

PP Needle punched Nonwoven Geotextile is mainly made of PP or PET short fiber and is produced by non-woven process. It has functions of isolation, filtration, drainage, reinforcement, protection and maintenance,etc.
80g/m2~1500g/m2; width 1-6meters, length according to customer needs.
Can be manufactured up to a width of 6 meters, leading to less loss of material.

PET Spunbond Nonwoven Geotextile Fabric is made by spinning continuous filament fibers onto a moving belt.
GSM (Gram / Sq meter): 20-200 GSM
Fabric type: PP Non Woven Fabric
End use/Application: For bags, hotel, hospital, mall, packaging
Width: 1m-3m
Min Order: 5 Tons
Production Capacity: 40 Tons

PP Spunbond Nonwoven Geotextile Fabrics are produced using a precise extrusion-based technology. The polymer is stretched into a continuous filament and loosely spread onto a conveyor belt to form the web. Air is used to form and lay the fabric filaments.

Spunbond Nonwoven Geotextile Fabric are 100% polypropylene spunbond nonwoven and offer excellent uniformity at high strength in all directions. Available in many styles and corresponding ranges, fabrics are chosen for a wide variety of end uses. They are smooth, porous sheets that are made of filaments of appropriately distributed thermoplastic fibers.

Spunbonded nonwoven geotextiles typically have more uniform properties than other structures of nonwoven. They are produced using medium to coarse dpf continous filament fibers.
It is similar to filament yarn production. From the chips storage, the polymer is vacuum-fed to a dosing station on top of the extruder. Inside the extruder, it becomes melted and homogenized.

Polyester Staple Fiber Geotextile provide the containment and erosion control industries with the highest quality geotextiles available.
1) Weight / Mass: 100gsm - 1500gsm
2) width: Within 8m
3) longth: 50-100m/roll

Geotextile is also known as weaving geomaterial is a kind of composite geomaterial with good permeability which is acupunctured or knitted using composite fiber. Cloth-like product has the general width of 4-6 meters and a length of 50-100 meters. Geotextile can be divided into woven and the non-woven geotextile.

PET Nonwoven Geotextile is made of polyester or polypropylene in random directions and punched together by needles. GSNW Geotextiles has good impermeability and resistance to deformation, which allows geotextiles be widely applied in civil projects for separation, filtration, reinforcement, protection and drainage.

PET Spunbond Nonwoven Fabrics are supplied in widths ranging from16cm to 250cm with basis weights ranging from 12 gsm to over 300 gsm.
PET Spunbond Nonwoven Fabric is commonly made with fine to medium dpf continuous filament fibers. These fabrics are uniform and dimensionally stable. Polypropylene fabrics require additives for UV and heat stability.

PP Spunband Fabric that is made available in enormous texture, lengths and colors. This fabric is woven under the surveillance of our ingenious professionals by utilizing the finest quality polypropylene and advanced machines adherence with set international standards. In addition to this, our offered fabric is basically used for making various kinds dresses like shirts, skirts, suits, etc.

Known for its high strength, high moisture support, lightweight and soft texture, the offered Spunbond non woven fabric is manufactured as per the industry laid norms. As a quality focused name, we assure that the quality of the offered spunbound non woven fabric is never compromised at our end.
This non woven fabric is generally used to make all disposable bags and garments. Spun from the best in class fibers, this non woven fabric is also stringently checked against numerous parameters by our quality controllers.

Polyester Filament Needle Punched Geotextile was made from virgin polyester chips, the continous filament was extruded from polyester chip by machine directly by spunbond process. Pet Long Fiber Nonwoven Geotextile punch together to get the stable 3D with highter strength fabric. so Nonwoven Geotextile Fiber has high strength, good creep property excellent and erosion resistance, aging-resistance and heat resistance.

Our Non Woven Geotextiles provide the containment and erosion control industries with the highest quality geotextiles available.
Staple fiber needle punched geotextile is made of polypropylene staple fibers on cross-laying equipment and needle punched equipment. It owns the advantages of acid and alkali resistance, erosion resistance, aging resistance, large strength, stable size, good filtrability etc.

Nonwoven Polyester (PET) Geotextiles include fabrics for separation and stabilization, subsurface drainage, filtration and cushioning include fabrics for separation and stabilization, subsurface drainage, filtration and cushioning.
PET Nonwoven Geotextile has good air and water permeability to let water flow through it so as to effectively control sandrock running-down.

PP Staple Fiber Nonwoven Geotextile is manufactured using short synthetic fabric (polypropylene fiber) as main materials. The product is formed after the processes of opening, combing, mixing and disordering, lapping and needling.

PP Nonwoven Geotextiles are made from polypropylene stable fibers that are needle-punched. Can be manufactured up to a width of 6 meters, leading to less loss of material. Both white and tinted varieties of geotextile are manufactured from 100% pure yarn. No recycled material is used.